Projects
There are 4 results.
DEMONA - Demonstration of UAS Integration for VLL Airspace Operations
Within the DEMONA framework, the integration of an unmanned aerial vehicle into civil airspace and therein used flight guidance, which is based on the Galileo satellite navigation system, will be carried out for the first time in Austria. For this purpose, subsystems for navigation receiver, navigation data fusion, airspace demarcation, data link and collision prevention are to be integrated into a small UAS, and flight testing based on instrument procedures is to be carried out.
HEMEP - Hybrid Electric Multi Engine Plane
The consortium partners in the HEMEP project aim to play a pioneering role in the field of aviation in electric propulsion systems, and thus enable the participating companies to become technology leaders for the future. The multi-engine aircraft with a hybrid electric propulsion system project will serve to further develop the basics of calculation methods in different areas for electric flying.
OMOSA - Open Modular/Open Source Avionics Architecture for Remotely Piloted Aircraft Systems
OMOSA is researching the system architectures of avionics for small unmanned aerial vehicles, following the Integrated Modular Avionics (IMA) approach. By using commercial, modular hardware and open source software, aircraft electronics are to be developed. These can be used for flight control, as a navigation system, and as a C2 link. For this purpose, aircraft antennas integrated into the fuselage will also be included. The project results will be validated via a measurement campaign using a rotorcraft.
eSAFE - Emergency Safe Return for CS23 Aircraft
The aim of the project is the development of an automatic emergency flight guidance, including emergency landing for the EASA CS23 category aircraft. In case of sudden in-flight pilot incapacitation or technical problems, after activating the emergency button on board, an airfield with an approach route taking into account dynamic air traffic and weather data should be determined.