International UAV Icing Workshop

1. - 3. December 2026
Rail Tec Arsenal & Arcotel Kaiserwasser, Vienna, AT

As unmanned aerial vehicle (UAV) and advanced air mobility (AAM) operations expand into increasingly demanding environments, atmospheric icing remains one of the key technical and operational challenges. The 3rd International UAV Icing Workshop brings together leading experts from research, industry and regulatory bodies.

Organizer

Austrian Institute for Icing Sciences (AIIS) in collaboration with the NTNU UAV Icing Lab and RTA Rail Tec Arsenal.

Content Description

Atmospheric icing poses particular challenges for unmanned aircraft and advanced air mobility systems. Ice accretion can significantly affect aerodynamic performance, controllability, sensor function, power consumption and overall mission success.

The UAV Icing Workshop was set up to encourage exchange across disciplines and to strengthen collaboration between academia, industry, testing facilities and authorities. Building on the success of the previous editions in Trondheim (2022 and 2024), the third workshop will further advance scientific understanding, technological development and operational readiness in UAV icing.

The preliminary programme is now available. It includes keynotes by Leading Edge Atmospherics, the FAA and Austro Control, technical sessions, a poster session and guided tours of the RTA test facilities.

The technical sessions cover:

  • The icing environment: forecasting and onboard sensing
  • Ice detection
  • Icing effects on propellers and aerodynamics
  • Ice protection systems
  • Icing simulations
  • Propeller icing
  • Icephobic materials and coatings

Contributors include FAA, NCAR, MET Norway, NRC Canada, DLR, ONERA, von Karman Institute, Fraunhofer IFAM, NTNU, TU Braunschweig, Politecnico di Milano, McGill University, Carleton University, Seoul National University, METU, Ubiq Aerospace and AIIS, among others.

All informations about the event on the event website

Program

Tuesday 1st of December 2026

at Rail Tec Arsenal, Paukerwerkstraße 3

  • From 12:45 Arrival at RTA
  • 13:00-16:00 Guided RTA Facility Tours & Exhibition
    RTA
  • 16:00 - 21:30 Icebreaker

Wednesday 2nd of December 2026

at Arcotel Kaiserwasser, Wagramerstraße 8

  • 08:30 Registration & Speaker Check-in
  • 09:00 Opening Session Day 1
  • 09:40 Keynote: Forecasting Icing For Certification – Approaches, Challenges and UAV Applications
    Ben Bernstein, Leading Edge Atmospherics
  • 10:10 Technical Session: Ice Protection Systems
    Amihay Gornik, Aero Ice Free
  • 10:40 -11:20 Break
  • 11:20 Technical Session: The icing environment: forecasting and onboard sensing
    • A New Method for Mapping Icing Conditions Near the Surface
      Scott Landolt, NCAR
    • Exploring the Current Icing Product - Forecast Icing Product (CIP-FIP) and the Terminal Area Icing Weather Information (TAIWIN) Capability
      Stephanie DiVito, FAA
    • Investigating Icing Conditions in Norway - Evaluating the Harmonie-Arome Model using Helicopter Campaign Data
      Eirik Mikal Samuelsen, MET Norway
    • Icing Sentry - Real-Time Onboard Icing Warning and Severity Assessment
      Ville A. Kaikkonen, University of Oulu
  • 12:40 Lunch
  • 14:00 Technical session: Ice detection
    • Ice Accretion Detection on a Propeller using NRC Ultrasound Ice Accretion Sensors (UIAS)
      Dan Fuleki, NRC
    • Measuring Ice Thickness and Ice Type using Electromechanical Impedance Measurement
      Julia Feder, TU Braunschweig
    • Real-Time Icing Risk Classification for UAVs - Using Machine Learning to Extract Appendix C Cloud Properties from Optical Sensors
      Lars-Stephan Klein, NTNU
    • UAV Icing - Analysis of Threshold and Certification Criteria for Performance-Based Ice Detection on Small Fixed-Wing Drones
      Bogdan Løw-Hansen, NTNU
  • 15:20 Break+Poster session
  • 16:20 Technical Session: Icing Effects on Propellers and Aerodynamics
    • Experimental Investigation of a Ducted Fan in DLR's Whirl Tower Icing Test Facility
      Cedric Obatolu, DLR
    • Impact of Glaze and Rime Ice on UAV Propeller Performance under Constant-RPM Operation
      Matteo Mirafiori, Eurac Research
    • From Roughness to Ice Shapes - Aerodynamic Effects on a UAV at Low Reynolds Numbers
      Ilaria Savoldi, Politecnico di Milano
  • 17:05 - 17:10 Closing Remarks
  • 17:30 - 19:00 Free time / Christmas market, Rathausplatz
  • 19:00 - 22:00 Dinner, Rathauskeller

Thursday 3rd of December at Arcotel Kaiserwasser

at Arcotel Kaiserwasser, Wagramerstraße 8

  • 08:45 Registration & Speaker Check-in
  • 09:00 Opening Session Day 2
  • 09:10 Keynote: UAV Icing from the FAA perspective
    Cris Bosetti & Dennis Regnier, FAA
  • 09:40 Keynote: European Drone Regulations in Context of Icing
    Joy Winrich Ancheta, Austro Control
  • 10:10 Technical Session: Propeller Icing
    • Ice Shedding Mechanisms from UAV Propeller Blades
      Oleksandr Maslov, Carleton University
    • Numerical Investigation of Ice Accretion on a Wing Behind Multiple Propeller Wakes Using an Actuator Disk Model
      Younghyo Kim, Seoul National University
  • 10:50 Break
  • 11:20 Technical Session: Ice Protection Systems
    • Investigation of Piezoelectric Resonance De-Icing on a Ducted Fan Propulsion System
      Sebastian Neveling, DLR
    • Sequential Modal Excitation for Piezoelectric De-Icing - Experimental Insights for Lightweight UAV Ice Protection
      Francesco Mancini, VKI
    • Taking UAV Ice Protection to the Next Level - Flight Testing of a Commercial Multirotor UAV with an Ice Protection System in a Climatic Wind Tunnel
      David Kozomara, AIIS
    • A Holistic UAV Ice Protection System for VTOL UAVs
      Maja Solum, Ubiq Aerospace
  • 12:40 Lunch
  • 14:00 Technical session: Icing Simulations
    • Progress on Validating FENSAP-ICE for Low-Reynolds-Number Applications
      Cedric Obatolu, DLR
      Markus Lindner, NTNU
    • Assessment of ONERA Numerical Approach for UAV Icing Using NRC Wind Tunnel Data
      Quentin Duchayne, ONERA
    • Sequential Prediction of Airfoil Ice Accretion using Physics-Informed Surface Features
      Eda Bahar Sarıbel, METU
    • Multi-Step Simulation of Three-Dimensional Ice Accretion on Propellers in Axial Flight
      Francesco Caccia, Politecnico di Milano
  • 15:20 Break
  • 16:00 Technical Session: Icephobic Materials and Coatings
    • Low-Energy Ice Protection for UAVs - From Icephobic Coatings to Hybrid Active-Passive Systems
      Nadine Rehfeld, Fraunhofer IFAM
    • Woven Meshes as Passive Ice-Management Surfaces - From Drop Impact to Ice Accretion and Shedding
      Anne-Marie Kietzig, McGill University
    • Advanced Polymer Coatings for Hydrophobic and Anti-Icing Applications
      Bartłomiej Przybyszewski, Technology Partners Foundation
  • 17:00 - 17:10 Closing Remarks

Posters

  1. Ice Delay - Case Study
    Monika Pilz, SINTEF
  2. Complementary Icing Test Facilities for UAVs - Status and Outlook at AIIS
    Thomas Neubauer, AIIS
  3. Latent Heat and Heating Pulses for Ice Detection on UAV Wings
    Samir Charif, TU Braunschweig
  4. UAV Testing Capabilities of Rail Tec Arsenal
    Johannes Lucke, RTA
  5. The AGIROS Open Rotor and Propeller Icing Test Rig for the Rail Tec Arsenal Climatic Wind Tunnel and its Specific Adaptation for Innovative Air Mobility Applications
    Jakob R. Amon, PEGASUS R&D
  6. On the Use of Dual-Polarimetric Radar Data for Aircraft Icing Diagnoses
    Scott Ellis, NCAR
  7. Machine Learning for the Acoustic Recognition of Rotor Icing
    Cole Gladders, Carleton University
  8. Hybrid Experimental-Numerical Approach for Ice Mechanical Properties Characterization
    Francesco Mancini, VKI
  9. A Simulation-Based Framework for Certification-Relevant Assessment of Aircraft Icing Effects
    Henidya Putri Heramarwan, Politecnico di Milano
  10. Airfoil Shape Optimization for Icing Mitigation on Small UAVs
    Beraat Uzun, METU
  11. Hybrid Chemical and Laser Surface Modification of Polyurethane Coatings for Anti-Icing Applications
    Anna Łabęda, Warsaw University of Technology
  12. Identification and Quantification of Mixed Phase Clouds with the Backscattering Cloudprobe with Polarization Detection
    Darrel Baumgardner, Droplet Measurement Technologies

Full program on the event website

Target Audience

The workshop is aimed at anyone who works with or researches UAV operations in icing conditions, or wants to understand the challenges better.

Participants include UAV and AAM manufacturers and operators, companies developing ice detection or ice protection technologies, research institutions, testing facilities, regulators and authorities.

No previous expertise in UAV icing is required. The workshop is also an ideal starting point for companies and individuals who want to build knowledge, learn about current technologies and regulatory developments, and connect with experts and potential partners from the UAV icing community.

Participant Information

Registration

Registration is open until 16 November 2026. Places are limited, with a maximum of 150 tickets for in-person attendance in Vienna. The ticket covers all three workshop days, catering and the networking dinner. Please confirm your participation in the RTA tour/ice breaker and the networking dinner during registration.

Start Registration

Call for Abstracts

The call for abstracts is closed. Thank you to everyone who submitted a contribution. Please note that presentations can only be held in combination with a valid ticket.

Travel & Accommodation

Travel information and a hotel booking link are available on the event website.

Contact Address

Austrian Institute for Icing Sciences
Rathausplatz 1-4
A-8580 Köflach
E-mail: office@aircraft-icing.com